TIO9011 - 12-Channel Digital Input-Output Module

The TIO series of products are general-purpose test modules designed for automotive electronic systems and can be used in scenarios such as hardware-in-the-loop (HIL) testing. These modules provide an efficient and flexible way to simulate and test various electronic control units (ECUs) in automobiles, helping engineers to ensure system reliability and performance while accelerating the development cycle and lowering the cost, making them an indispensable tool for automotive electronic system development. It is an indispensable tool in the development of automotive electronic systems.

TIO series devices adopt a highly modular design, users can independently select the required modules to be cascaded through the Remo connector harness, multiple modules cascaded using the same star matching Remo connector harness to access the power supply for the device and connect the CAN/CANFD bus tool can be used to control the TIO series devices through the TSMaster software on the PC.

specificities

• Modular Design: The TIO series adopts a highly modular design, allowing users to quickly configure and expand the test system by selecting the corresponding functional modules according to the test requirements;
• Multifunctional Integration: TIO series devices integrate relay control, resistor simulation, digital input and output, and analog input and output;
• High Precision Output/Acquisition: TIO series devices are capable of providing high precision signal processing, such as resistance simulation, voltage/current output acquisition, and PWM signal output acquisition;
• High software fit: TIO series boards are highly compatible with TSMaster software and can be seamlessly integrated into some of TSMaster's automated test cases, simplifying the configuration process and lowering the threshold of use.

Functional parameters

Drive capability:

The digital signal output supports push-pull, low-side drive (NMOS open-drain), and high-side drive (PMOS open-drain):

• Push+Pull (push-pull mode): can output low level or high level, strong driving ability.
• Push (high side drive): can output high level, low level need to pull down.
• Pull (low side drive): can output low level, high level need pull-up.

The internal high level reference voltage (VCC_5V) or external high level reference voltage (VBAT) is used only in PUSH mode, PULL+PUSH mode. The threshold voltage (VREF) and the high level voltage (VBAT) can be set with an external reference voltage.

Parameters