大红鹰dhy登录界面「网站首页」欢迎您 /en/product/tio9015/ /en/product/tio9015/#respond Wed, 18 Jun 2025 08:12:06 +0000 /?post_type=product&p=20003 TIO9015 is an analog output/acquisition module with a total of 8 independent input/output channels, each channel supports voltage output, voltage acquisition, current output, current acquisition, and also supports the function of retrieving the output voltage when working in voltage mode. Each channel supports voltage output, voltage acquisition, current output and current acquisition, and it also supports the function of retrieving output voltage when working in voltage mode. The voltage output supports outputting 0-60V high voltage, and the voltage acquisition supports -60V~-60V or 0~+60V wide voltage.

The post TIO9015 鈥 8閫氶亾妯℃嫙杈撳叆杈撳嚭妯″潡 first appeared on 涓婃捣鍚屾槦鏅鸿兘绉戞妧鏈夐檺鍏徃.

]]> The TIO series of products are general-purpose test modules designed for automotive electronic systems and can be used in scenarios such as hardware-in-the-loop (HIL) testing. These modules provide an efficient and flexible way to simulate and test various electronic control units (ECUs) in automobiles, helping engineers to ensure system reliability and performance while accelerating the development cycle and lowering the cost, making them an indispensable tool for automotive electronic system development. It is an indispensable tool in the development of automotive electronic systems.

TIO series devices adopt a highly modular design, users can independently select the required modules to be cascaded through the Remo connector harness, multiple modules cascaded using the same star matching Remo connector harness to access the power supply for the device and connect the CAN/CANFD bus tool can be used to control the TIO series devices through the TSMaster software on the PC.

specificities

  • Modular Design: The TIO series adopts a highly modular design, allowing users to quickly configure and expand the test system by selecting the corresponding functional modules according to the test requirements;
  • Multifunctional Integration: TIO series devices integrate relay control, resistor simulation, digital input and output, and analog input and output;
  • High Precision Output/Acquisition: TIO series devices are capable of providing high precision signal processing, such as resistance simulation, voltage/current output acquisition, and PWM signal output acquisition;
  • High software fit: TIO series boards are highly compatible with TSMaster software and can be seamlessly integrated into some of TSMaster's automated test cases, simplifying the configuration process and lowering the threshold of use.

Functional parameters

Voltage output:

Number of channels 8 channels
Output range 0V~+60V
DAC Resolution 16bit
accurate Transient Accuracy: 卤 (0.1%+5mV)
Average accuracy: 卤 (0.1%+5mV)
Output 0V may be up to 300mV depending on the channel.
Output Current 20mA@4 channels
10mA@8 channels

 

Voltage Acquisition:

Number of channels 8 channels
Measurement range -60V~+60V, 0V~+60V
sampling rate 250KHz
reporting rate 1kHz (active up) 4kHz (query)
ADC Resolution 20bit
accurate 0~60V Acquisition Mode.
Transient Accuracy: 卤 (0.1%+20mV)
Average accuracy: 卤 (0.1%+5mV)
-60~60V Acquisition Mode.
Transient accuracy: 卤 25mV
Average accuracy: 卤 5mV
Input Impedance 300K 惟

 

Current output:

Number of channels 8 channels
Output range 0mA~25mA
DAC Resolution 16bit
accurate Transient Accuracy: 卤 (0.1%+5uA)
Average Accuracy: 卤 (0.1%+5uA)

Current Acquisition:

Number of channels 8 channels
Measurement range 0mA~25mA
sampling rate 250kHz
reporting rate 1kHz (active up) 4kHz (query)
ADC Resolution 20bit
accurate Transient Accuracy: 卤 (1%+250uA)
Average Accuracy: 卤 (1%+10uA)

Parameters

Parameters Test Conditions Minimum Value Typical Value Maximum Value Unit
Operating Voltage DC power supply 60V output in full-channel self-return mode 9 12.0 36 V
Operating Current – 0.38 – A
Power Wastage – 4.6 – W
CAN Interface Bus Pin Withstand Voltage CANH, CAHL -58 – 58 V
Isolation Withstand Voltage Leakage current less than 1mA 2500 – – VDC
EMC Electromagnetic Compatibility ESD IEC61000-4-2 standard Contact discharge: 8
Air discharge: 15		 – – kV

The post TIO9015 鈥 8閫氶亾妯℃嫙杈撳叆杈撳嚭妯″潡 first appeared on 涓婃捣鍚屾槦鏅鸿兘绉戞妧鏈夐檺鍏徃.

]]> /en/product/tio9015/feed/ 0